96' Cobra Engine transfer to 95' Mustang > Forums

Forums

Members

Subject: 96' Cobra Engine transfer to 95' Mustang

You are not authorized to post a reply.

Author

Messages

snatw

Posts:1

06/28/2006 9:33 PM	Alert
Hello Everyone! I just wrecked my 96' Cobra and I was told that frame can't be fix so I had been looking around for another frame to transfer engine, trans and axle. Does anyone know possibility to change out 96' Cobra frame against 95' Mustang frame to exchange major components? Is there any modification require to mount engine? Thank you, Ki

rlyons13 User is Offline

SCOA Founder

Posts:17

06/30/2006 12:51 PM	Alert
Ki, Everything will fit from the 96 into a 94-95 chassis. I believe the only structural piece you'd need would be the 1996 K-member. I think. You may be able to reuse the 94-95 K-member. One of our other club members has a mod motor K-member free for pick up in the New England area. Bob

Bob Lyons National Director, SCOA 1993 Ford Mustang SVT Cobra 1988 asc/McLaren Mustang 2005 Chrysler PT Cruiser Touring Turbo Convertible

cobr96 User is Offline

Posts:3

07/02/2006 10:15 AM	Alert
Also the 96 cobra transmission has the mount in a different location. So ford made a different trans. crossmember to make up for the difference the 96 body has brackets (for the x-member) that are bolted to the body. The 95 body has brackets that are welded on, in different location. Just cut the 95 brkts off and drill new holes for the cobra brkts. Kevin www.1993cobra.com

You are not authorized to post a reply.

Forums > SVT Cobra > 1996 - 1998 > 96' Cobra Engine transfer to 95' Mustang